To begin to eliminate the problem, start at the source of the overflow or leak. You'll then systematically work your way back into the system until you locate the source of the problem. Most people will try the easy to use chemical solvents first to unclog a stopped drain.
While this method is sometimes effective, the quickest and easy way is to use a plunger. Plungers are inexpensive and can be purchased at your local hardware store. Plungers apply sealed pressure to the area that force the clog to move.
If a plunger doesn't work then you may want to go to your local hardware store in the general plumbing help section and purchase a snake. A snake is a cable that you turn with a crank designed to grab a clog and disperse it, allowing your water to flow freely.
General Plumbing Help
Only after you have pursued these methods should you try a chemical solvent to remove the clog. Beware using a chemical can cause problems if you have overflow on your flooring or clothing. These substances are powerful and can leave permanent damages.
The best way to avoid septic system problems is use preventative maintenance. By regularly using a chemical solvent, your pipes will stay clean thus promoting a free-flowing system. Typically, in a powder form, this cleaner releases enzymes in your septic system. These enzymes will break down your deposits, eating away at build-up in the lines under your home that feed to your septic system.
Then the second most important piece of general plumbing help to keep your septic running properly is to not use chlorine bleach unless absolutely necessary. Bleach kills the good enzymes in your septic system that breaks down deposits, causing them to break down at a much slower rate.
For more information about general plumbing help.